Saturday, January 20, 2024

Poncho for Joan



I am beyond pleased with the result of this project. The yarns did all the work. Plymouth Boku  in Key West colorway and Premier Boreal in Tundra. 
Here's a look at the pin included. So many colors are in the poncho and I wanted a bit of brightness and contrast, so I chose these beads to add that pop.

 Here's how I knit this poncho.  Have you knit a mitered square? Here is a video which shows how to make one. https://vimeo.com/6832500

The poncho begins in the middle with two garter stitched strips of vertical strips, 25 stitches wide. Two rows equal one ridge, so you will knit 85 ridges for one side and 85 ridges for the other. 
After you have the two panels of stripes you will pick up 51 stitches along the two edges to join the strips, and make a mitered square. Repeat for the other end of the two panels. 
Then the bottom section comes next. Pick up stitches along the edge of the center section. The stitches will be 135 for each side. Knit 25 ridges for the bottom section. Then join with mitered squares. 
Next comes the neck section. Count 25 ridges from the middle of the front, and pick up stitches all the way around to the front again, ending 25 ridges from the center. Knit with decreases in the center back, just as you would with a mitered square. 
Finally pick up stitches on the two edges of the neck section, 51stitches total and make a mitered square. The bottom of the square will have to be sewn to the center front. 
This is very easy if you are familiar with picking up stitches, and counting ridges. If you have any questions, please email me and I'll help.

Wednesday, November 30, 2022

Cowls 2022





Dots and Dashes Cowl #27. Casablanca, Noro Nishiki, Noro Janome, and other merino and silk combinations.






Dots and Dashes Cowl #28. Malabrigo Rastita, Noro Janome, Casablanca, and other merino and silk combinations.


Tuesday, November 8, 2022

Lots of New Knits


A few items which were knit over the last few months. 

Sideways Cowl #11, I'm keeping this one I think. Fingering yarns like Koigu.



 
Rosette Shawl, made for Iza, Silk Garden and Wendy Merino DK.

 



Rosette Shawl #2.  Also made for Iza. Boku and Araucania.


Casablanca and Rios cowl. Gifted to Carol.


Wednesday, September 21, 2022

Moving and Organizing

About a week and half ago, I bought another house. I was after a smaller footprint, less yard, less to clean and no extra rooms that we never use and yet collect dust, doggie hair and empty cups. It was a cute house and came with an outbuilding which would have made a great studio, which I didn't currently have. But the deal changed after the home inspection and we decided to not take on the problems that came with that house. We were disappointed and felt blue for a while until in the middle of the night I woke up with a great new plan. 
It involved changing just about every room in our current house to make my work easier and to give me the studio I wish I had. This required negotiating with Dave to put him in a smaller bedroom and then I could have the master for my sewing, painting, collage and polymer clay stuff. Plus I would get a big walk-in closet to store my yarn!!!
I have been wanting to find a better way to store my yarn and get it out of the bins that were wedged into a small closet. It's always the bin on the bottom that has the yarn I was seeking so lifting and moving the others was big hassle. 
I called on my pal and fellow knitter Patsy to come help me unload these into my new hanging yarn system. 
This idea came from several photos on Pinterest and I knew it would work for me. All of these  storage hangers came from Walmart.


I also have my quilts in this closet, hung on skirt hangers to avoid creases. Because of this organizing binge I can now find things when I need them. Hurray!
Full disclosure: I still have yarn in the garage, in plastic bags, and eventually all will find a home in this closet. Then came the work to make the rest of this master bedroom into a studio.
This is the 'Before' picture and even this is two days into the decluttering. There is a big en suite bathroom that had to be dealt with too, and I took it over just in the nick of time before it was hopeless. 
Here is the new studio with mostly everything that was stored or unreachable over the last two years.

I'm exhausted from all the furniture moving, cleaning and deciding what to toss and what to keep, and yet ecstatic to have a studio again, and such a bright and sunny one at that. The one bookcase is awaiting stuff that is up high in another closet. I'll get to it, maybe tomorrow... or after my nap.


The living room, dining room and hall bathroom got makeovers too, but this is the really good one, in my humble opinion. And of course, now I don't want to move.
By the way, Dave likes his new room and so does his canine companion, Tony.

Friday, September 16, 2022

Miteriffic Poncho Pattern V.2

 imageimage
A poncho designed in panels of mitered diamonds and triangles. Some experience with mitered diamonds is recommended. For detailed video instructions on making miters see: http://vimeo.com/6832500
For excellent miter written instructions see: http://megan.kiwi.gen.nz/MitresArticle/
For simplicity here the directions for individual miters are reduced to just the specifics.
Noro Kureyon or other worsted weight yarns:
Needles: US 10 for body and US 8 dpns or circular needle for collar
Note: Slip first stitch every row.
Sized Medium, for a wingspan of 60”. (For taller wearers increase the size of the larger diamonds by 10 stitches, or 70+1. Follow the math to increase the smaller diamonds to half or 35+1.)
Center panels back and front are knit the same: Cast on 60+1stitch to make mitered diamond #1. Knit every row, alternating two contrasting yarns.
For triangle #2 pick up 30+1 stitches on the edge of first diamond. Knit every row, alternating yarns, and at the end of the rows on the right side decrease K2tog, K1. After triangle is decreased to last stitch, break yarn. For triangle #3, pick up 30+1 stitches along other edge of diamond #1. Knit every row and alternate yarns. At the beginning of right side rows, K1, k2tog, k to end.
Diamond #4 is the same as #1 and the stitches are picked up from the previous three modules. #5 and #6 are the same as #2 and #3.
Neck Triangle #7: Pick up 30 stitches from between triangles #5 and #6. Make triangle: Right side only: K1,k2tog, knit to center three stitches, make decrease, knit to last three stitches, k2tog, k1.
Make back panel the same as front panel.
Join front and back panels with triangles made the same way as triangle #7.
Center Sleeve panel.
clip_image004
The center sleeve panel is based on a diamond of 30 +1 stitches and triangles of 16 stitches picked up on the edges of the diamonds. The diamonds # 1,4,and 7 are based on 31 stitches, while the triangles #2,3,5 and 6 are 16 stitches. The tiny triangles #8,9,10 and 11 also pick up16 stitches but have been decreased (k2tog) the beginning and ending of every front row.
The sleeve sides are then sewn to the center sleeve panel.

Sleeve side triangles
Pick up 57 stitches along edge of front or back panels. One or two extra stitches are OK, whatever makes it look like every edge stitch is included. Decrease on right sides by k1, k2tog on bottom edge to match the direction of the front or back panel bottom diamond. Carry up contrasting yarn on opposite side.
Make four sections, two on each side for sleeves. Sew sleeve sides to sleeve center panel.
imageimage
Collar. Pick up stitches around the square neck opening, using smaller dpns, or a circular needle #8 and a single yarn, join in a circle. For a cowl collar: Knit with a single yarn, alternating one row knit and one row purl. Bind off at desired height. If desired, the collar can be split and knit flat after then initial six rows are knit. To do this, knit six rounds, find center front stitch, turn and knit to end, slipping first stitch of each row. If buttonholes are desired, make a simple one with yo, k2tog.
image image
Collar. Pick up stitches around the square neck opening, using smaller dpns, or a circular needle #8 and a single yarn, join in a circle. For a cowl collar: Knit with a single yarn, alternating one row knit and one row purl. Bind off at desired height. If desired, the collar can be split and knit flat after the initial six rows are knit. To do this, knit six rounds, find center front stitch, turn and knit to end, slipping first stitch of each row, alternating one row knit and one row purl. If buttonholes are desired, make a simple one with yo, k2tog.
Optional cuffs. Pick up stitches all around bottom of sleeve and join in a circle. Knit 1 row, Purl 1 row alternately for 12 rows or six ridges, bind off.
Blocking really helps this yarn lie flat and drape best.


Thursday, September 15, 2022

Frosty Shawl

Frosty Shawl
Knit from Cascade Casablanca, 59% Wool, 24% Silk 17% Goat - Mohair  and Gedifra 100% Merino.
The pattern, which I actually followed (!) was the Weaver's Wool Mini Shawl. It's a great little wearable piece, that stays on the shoulders without tugging or adjusting. I think it will be a fave, and will provide a base for lots of variations. 


Available for purchase for $45 plus shipping. Email me.